CELBOOST Signal Booster (CB-1) is used to provide radio frequency (RF) coverage to areas which either lack signal or lack the required signal strength for adequate mobile phone performance. Insufficient coverage may occur both indoors and outdoors and can include such areas as office buildings, parking garages, apartment buildings, shopping malls and residential homes. The weal coverage multitude of installation configurations.
booster systems provide an effective solution by redirecting, filtering and amplifying the available signal at the pick up antenna, into the weak coverage area, through a properly selected interior coverage antenna.
Product Type | Signal Repeater |
Talk Range | 1200 to 1500 sq ft area |
Current | 12V 2A Watt/Volt ( w/v) |
Dimension(L*W*H) | 200*110*25 |
Frequency Range | 900 and 1800 |
Power | 12V 2A Watt/Volt ( w/v) |
Material | Metal |
Weight | 900 Grams (g) |
We are number one trader, supplier and exporter of Dual Band 900 And 1800MHz Medium Power (Golden) in New Delhi, Delhi, India. Greatly improves cell phone performance while in building, eliminating problems such as unstable reception, unclear vocal quality, difficulty in accessing calls and even calls being disconnected.
Frequency Range | 1710MHz ~ 1785MHz |
Power | -70 ~ -40dBm/FA (1.23MHz) |
Gain | 60±3 Db |
Max Output Power | +23dBm / ±3dBmTotal Power |
Impedance | 50© |
Power Supply | AC 110/220V (used AC/DC Adapter 12V dc) |
Seclusion | >70dB |
Compact Design | Indoor Use |
Item Dimension | 240 x 180 x 20mm |
Connect Mode | N connector |
Ambient temperature | -10oC~60oC |
LCD display function | can display signal strongness which it receives from outdoor antenna , the signal bar will be full black if the signal is received very good. |
Cell phone signal amplifier (also referred to as signal booster or direct signal amplifying station) is designed to solve cell phone signal blind. In some location such as remote area from base station, high-rise, basement, location behind by building, underground civil air defense projects, subway stations, elevator and many other places, cell phone can not be used due to receiving signals fail. This cell phone signal amplifier is aimed to solve the problems.
Product Type | Signal Booster |
Talk Range | 1200 to 1500 sq ft area |
Current | 12V 2A Watt/Volt ( w/v) |
Dimension(L*W*H) | 200*110*25 Millimeter (mm) |
Frequency Range | 900 and 2100 Megahertz |
(Hz) | (MHZ) |
Power | 12V 2A Watt/Volt ( w/v) |
Material | Metal |
Weight | 900 Grams (g) |
signal Booster is used to provide radio frequency (RF) coverage to areas which either lack signal or lack the required signal strength for adequate mobile phone performance. Insufficient coverage may occur both indoors and outdoors and can include such areas as office buildings, parking garages, apartment buildings, shopping malls and residential homes.
Working system | GSM/DCS |
Gain | Uplink≥50dB Downlink 55dB |
Output | Uplink 15dBm Downlink 20dBm |
Pass band ripple | ≤1.8DB |
I/O impedance | 50Ω |
Connector | N connector |
Noise figure | ≤8dB |
Transmission delay | ≤0.5μs |
Power supply | AC110V-240V DC12V |
Size | 134mm*105mm*28mm |
Weight | 400g |
Coverage area | 300m² |
Product Type | Signal Booster |
Talk Range | 500 to 700 sq. feet area |
Current | 5v 3amp Watt/Volt ( w/v) |
Dimension(L*W*H) | 134*105*28 Millimeter (mm) |
Frequency Range | 900 and 1800 Megahertz |
(Hz) | (MHZ) |
Power | 5V 3A Watt/Volt ( w/v) |
Material | Metal |
Weight | 400 Grams (g) |
Cell phone signal booster is also called repeater, amplifier, which is a products designed to solve the mobile phone blind signal. As the mobile phone signal is transmitted by electromagnetic waves to establish a communications link, the building of the barrier, in some tall buildings inside, the basement of some places such as malls, restaurants, places of entertainment such as karaoke OK sauna and massage, underground civil air defense projects, subway stations and many other places where cell phone signals cannot reach and cannot use the phone. Cell phone signal amplifier can solve these problems in a particular place as long as the installation of a mobile phone signal amplifier system, the entire range of mobile phone signals can be well used, staff or customers will get great convenience.
Frequency range | GSM 880-915 925~960MHz DCS1920-1980 2110-2170mhz |
Output | Up link :15dBm Down link: 17dBm |
Port VSWR | ≤1.8DB |
Noise figure | ≤6dB |
Ambient temperature | -15°C~55°C |
Size/weight | 130*105*28MM/900g |
Gain | Up link: Gp≥63dB Downlink: Gp≥68dB |
Function | a)Power supply LED denote b) Export power LED denote |
I/O impedence | 50Ω/N connector |
Transmission delay | ≤0.5μs |
Power supply | AC/220V±10% 45~55Hz |
Coverage area | 500 to 700 sq ft |
Product Type | Signal Booster |
Talk Range | 500 to 700 sq. feet area |
Current | 3A Siemens Volt (S ) |
Dimension(L*W*H) | 134*105*28 Inch (in |
Frequency Range | 900 and 2100 Megahertz |
(Hz) | (MHZ) |
Power | 5V Siemens Volt (S ) |
Material | Metal |
Weight | 900 Grams (g) |
Cell phone signal booster is also called repeater, amplifier, which is a products designed to solve the mobile phone blind signal. As the mobile phone signal is transmitted by electromagnetic waves to establish a communications link, the building of the barrier, in some tall buildings inside, the basement of some places such as malls, restaurants, places of entertainment such as karaoke OK sauna and massage, underground civil air defense projects, subway stations and many other places where cell phone signals cannot reach and cannot use the phone. Cell phone signal amplifier can solve these problems in a particular place as long as the installation of a mobile phone signal amplifier system, the entire range of mobile phone signals can be well used, staff or customers will get great convenience.
Frequency range | GSM 880-915 925~960MHz DCS1920-1980 2110-2170mhz |
Output | Up link :15dBm Down link: 17dBm |
Port VSWR | ≤1.8DB |
Noise figure | ≤6dB |
Ambient temperature | -15°C~55°C |
Size/weight | 130*105*28MM/900g |
Gain | Up link: Gp≥63dB Downlink: Gp≥68dB |
Function | a)Power supply LED denote b) Export power LED denote |
I/O impedence | 50Ω/N connector |
Transmission delay | ≤0.5μs |
Power supply | AC/220V±10% 45~55Hz |
Coverage area | 500 to 700 sq ft |
Product Type | Signal Booster |
Talk Range | 500 to 700 sq. feet area |
Current | 3A Siemens Volt (S ) |
Dimension(L*W*H) | 134*105*28 Inch (in |
Frequency Range | 900 and 2100 Megahertz |
(Hz) | (MHZ) |
Power | 5V Siemens Volt (S ) |
Material | Metal |
Weight | 900 Grams (g) |
Cell phone signal booster is also called repeater, amplifier, which is a products designed to solve the mobile phone blind signal. As the mobile phone signal is transmitted by electromagnetic waves to establish a communications link, the building of the barrier, in some tall buildings inside, the basement of some places such as malls, restaurants, places of entertainment such as karaoke OK sauna and massage, underground civil air defense projects, subway stations and many other places where cell phone signals cannot reach and cannot use the phone. Cell phone signal amplifier can solve these problems in a particular place as long as the installation of a mobile phone signal amplifier system, the entire range of mobile phone signals can be well used, staff or customers will get great convenience.
Working system | GSM 880-915 925~960MHz DCS1920-1980 2110-2170mhz |
Frequency range | Uplink890~915MHz Downlink 935~960MHz |
Gain | Uplink≥75±2dB Downlink 80±2dB |
Output | Uplink 23dBm Downlink 27dBm |
Pass band ripple | ≤1.8DB |
I/O impedance | 50Ω |
Connector | N connector |
Noise figure | ≤8dB |
Transmission delay | ≤0.5μs |
Power supply | AC110V-240V DC5V |
Size | 220mm*170mm*55mm |
Weight | 1.9kg |
Coverage area | 1200 to 1500 sq ft |
Product Type | Signal Booster |
Talk Range | 1200 to 1500 sq ft area |
Current | 3A Siemens Volt (S ) |
Dimension(L*W*H) | 220*155*70 Centimeter (cm) |
Frequency Range | 900 and 1800 Megahertz |
(Hz) | (MHZ) |
Power | 5V Siemens Volt (S ) |
Material | Metal |
Weight | 2900 Grams (g) |
Cell phone signal booster is also called repeater, amplifier, which is a products designed to solve the mobile phone blind signal. As the mobile phone signal is transmitted by electromagnetic waves to establish a communications link, the building of the barrier, in some tall buildings inside, the basement of some places such as malls, restaurants, places of entertainment such as karaoke OK sauna and massage, underground civil air defense projects, subway stations and many other places where cell phone signals cannot reach and cannot use the phone. Cell phone signal amplifier can solve these problems in a particular place as long as the installation of a mobile phone signal amplifier system, the entire range of mobile phone signals can be well used, staff or customers will get great convenience.
Specifications | Uplink | Downlink | Bandwidth |
Frequency range | 890~915Mhz | 935~960Mhz | 25MHZ |
DCS | 1710~1780Mhz | 1805~1880Mhz | 70MHZ |
WCDMA-3G | 1920~1980mhz | 2110~2170Mhz | 60MHZ |
Max Gain | 75dB | 80dB | |
Output Power | 23dBm | 27dBm | |
Noise Figure @ max. gain | 4dB | 4dB | |
Power Supply | AC:110~240V, 50Hz/ 60Hz;DC:5V 3A | ||
Power Consumption | 12.5W | ||
Impedance | 50 Ω | ||
RF Connector | N -Female | ||
Cooling | Heat sink Convection cooling | ||
Dimensions (D x W x H ) | 256X206.91X57.3(mm) | ||
Weight | 2.9KG | ||
Operating Temperature | -10℃ ~ 55℃ |
Product Type | Signal Booster |
Talk Range | 1200 to 1500 sq ft area |
Current | 3A Siemens Volt (S ) |
Dimension(L*W*H) | 220*155*70 Centimeter (cm) |
Frequency Range | 900 and 1800 Megahertz |
(Hz) | (MHZ) |
Power | 5V Siemens Volt (S ) |
Material | Metal |
Weight | 2900 Grams (g) |
A mobile phone signal repeater provides the ultimate solution in any area where cellular communications cannot work well due to Leak of signals. The repeater device features easy installation & operation, build-in indoor antenna and no interference. It could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cell phones. A mobile phone repeater is ideal for house, home, office use.The device featured by easy installation & operation and no interference. It is the ideal device for boost mobile phone signal. A mobile phone repeater could also improve indoor electromagnetism environments, protract cellular battery life and reduce radiation of cell phones.
Product Type | Signal Booster |
Talk Range | 2500 to 3000 sq feet area |
Current | 6A Ampere (amp) |
Dimension(L*W*H) | 220*320*40 Millimeter (mm) |
Frequency Range | 900, 1800 & 2100 |
(Hz) | (MHZ) |
Power | 5V Watt/Volt ( w/v) |
Material | Metal |
Weight | 3.50 Kilograms (kg) |
Frequency | GSM Band: Uplink: 890~915MHz; Downlink: 935~960MHz DCS Band: Uplink: 1710-1785MHz; Downlink:1805-1880MHz 3G: Uplink: 1920-1990MHz; Downlink: 2110-2180MHz |
Power | 17 dbm |
Gain | Uplink: 29~60dB; Downlink: 34~65dB |
Coverage Area | 1000-1200 square feet |
Connector Type | N Female |
Power Supply | AC100~240V 50~60Hz / DC12V 2A |
Color | Half White |
Size: | 220 x 180 x 20 mm |
Net Weight | 2280 gram |
Product Type | Signal Booster |
Talk Range | 1200 to 1500 sq ft area |
Current | 3A Ampere (amp) |
Dimension(L*W*H) | 180x180x30 Millimeter (mm) |
Frequency Range | 900, 1800 & 2100 |
(Hz) | (MHZ) |
Power | 5V Watt/Volt ( w/v) |
Material | Metal |
Weight | 1300 Grams (g) |
Frequency | GSM Band: Uplink: 890~915MHz; Downlink: 935~960MHz DCS Band: Uplink: 1710-1785MHz; Downlink:1805-1880MHz 3G: Uplink: 1920-1990MHz; Downlink: 2110-2180MHz |
Power | 17 dbm |
Gain | Uplink: 29~60dB; Downlink: 34~65dB |
Coverage Area | 1000-1200 square feet |
Connector Type | N Female |
Power Supply | AC100~240V 50~60Hz / DC12V 2A |
Color | Half White |
Size: | 220 x 180 x 20 mm |
Net Weight | 2280 gram |
Product Type | Signal Booster |
Talk Range | 1200 to 1500 sq ft area |
Current | 3A Ampere (amp) |
Dimension(L*W*H) | 180x180x30 Millimeter (mm) |
Frequency Range | 900, 1800 & 2100 |
(Hz) | (MHZ) |
Power | 5V Watt/Volt ( w/v) |
Material | Metal |
Weight | 1300 Grams (g) |
Frequency | GSM Band: Uplink: 890~915MHz; Downlink: 935~960MHz DCS Band: Uplink: 1710-1785MHz; Downlink:1805-1880MHz 3G: Uplink: 1920-1990MHz; Downlink: 2110-2180MHz |
Power | 17 dbm |
Gain | Uplink: 29~60dB; Downlink: 34~65dB |
Coverage Area | 1000-1200 square feet |
Connector Type | N Female |
Power Supply | AC100~240V 50~60Hz / DC12V 2A |
Color | Half White |
Size: | 220 x 180 x 20 mm |
Net Weight | 2280 gram |
Product Type | Signal Booster |
Talk Range | 1200 to 1500 sq ft area |
Current | 3A Ampere (amp) |
Dimension(L*W*H) | 180x180x30 Millimeter (mm) |
Frequency Range | 900, 1800 & 2100 |
(Hz) | (MHZ) |
Power | 5V Watt/Volt ( w/v) |
Material | Metal |
Weight | 1300 Grams (g) |